Difference between revisions of "IPC2 Errata Notes"

From fit-PC wiki
Jump to: navigation, search
(IPC2ERR002: LAN1 (I218) Ethernet disappearance)   (change visibility)
(IPC2ERR002: LAN1 (I218) Ethernet OS detection issue)   (change visibility)
Line 13: Line 13:
 
* '''Fix''': Install update I218 driver by installing PROWin (22.3) suite for your OS with connected LAN cable.
 
* '''Fix''': Install update I218 driver by installing PROWin (22.3) suite for your OS with connected LAN cable.
 
** Windows 10 driver: [https://downloadcenter.intel.com/download/25016/ Intel® Network Adapter Driver for Windows® 10*]
 
** Windows 10 driver: [https://downloadcenter.intel.com/download/25016/ Intel® Network Adapter Driver for Windows® 10*]
 +
** Windows 7 driver: [https://downloadcenter.intel.com/download/18713/ Intel® Network Adapter Driver for Windows 7*]
 
** After installation go to I218 driver properties - "Power Management" tab and uncheck "Ultra Low Power Mode when cable is disconnected" option in "Power Saver Options" list.
 
** After installation go to I218 driver properties - "Power Management" tab and uncheck "Ultra Low Power Mode when cable is disconnected" option in "Power Saver Options" list.
 
** The procedure required after each driver reinstall.
 
** The procedure required after each driver reinstall.

Revision as of 10:37, 17 May 2017

IPC2ERR001: LAN1 (I218) Ethernet FW speed

IPC2ERR002: LAN1 (I218) Ethernet OS detection issue

  • Date: 17-May-2017
  • Symptom: LAN1 (I218) is not detected by the OS if computer is rebooted with unplugged port
  • Applies to: Applies to IPC2 Broadwell computers that shows such behavior.
  • Cause: IPC2 Broadwell doesn't implement Ultra Low Power mode (Connected Standby).
  • Fix: Install update I218 driver by installing PROWin (22.3) suite for your OS with connected LAN cable.