Difference between revisions of "IPC2 Troubleshooting"
From fit-PC wiki
Line 10: | Line 10: | ||
+ | 2. Verify RAM memory modules are installed - | ||
+ | :: The system will not boot without memory. | ||
− | + | ||
+ | 3. Try to answer the following questions: | ||
::a. Are you able to power up without storage? | ::a. Are you able to power up without storage? | ||
::b. What type of storage being used in terms of RPM (in case of HDD)? | ::b. What type of storage being used in terms of RPM (in case of HDD)? | ||
Line 17: | Line 20: | ||
− | + | 4. [http://www.fit-pc.com/web/support/rma/ RMA procedure] |
Revision as of 07:10, 3 August 2014
1. IPC2 BIOS reset:
- a. Power down the PC and unplug the power cable.
- b. Open the service door (by screwing out one bolt) and remove it (with the storage).
- c. Reset the BIOS by pressing the low profile push button SW3 for 3 seconds.
- d. Install back the storage with the service door.
- e. Plug the power and power up the PC.
2. Verify RAM memory modules are installed -
- The system will not boot without memory.
3. Try to answer the following questions:
- a. Are you able to power up without storage?
- b. What type of storage being used in terms of RPM (in case of HDD)?
- Note that 7200rpm drives are not recommended due to lower power nature of the PC, as such drives used to overload the machine. 5400rpm drives at maximum must be used.