Difference between revisions of "Intense PC BIOS Update"
From fit-PC wiki
Line 2: | Line 2: | ||
== BIOS update procedure == | == BIOS update procedure == | ||
+ | <div class="toccolours mw-collapsible mw-collapsed" overflow:auto;"> | ||
# Download the latest [[Intense PC BIOS ROM files]] | # Download the latest [[Intense PC BIOS ROM files]] | ||
# Extract the image file from the archive. | # Extract the image file from the archive. | ||
Line 10: | Line 11: | ||
# After it the system will boot again into FreeDOS run ''ME_LOCK.bat'' and wait for it's completion without errors. | # After it the system will boot again into FreeDOS run ''ME_LOCK.bat'' and wait for it's completion without errors. | ||
# Wait until message "Please disconnect this system from power for 15 sec for completion" | # Wait until message "Please disconnect this system from power for 15 sec for completion" | ||
− | |||
# Power cycle the computer. | # Power cycle the computer. | ||
</div> | </div> | ||
− | |||
<!-- | <!-- | ||
Revision as of 11:02, 17 April 2018
Follow us on Google+ for software and BIOS updates
BIOS update procedure
- Download the latest Intense PC BIOS ROM files
- Extract the image file from the archive.
- Prepare bootable USB flash drive:
- Windows users - use Win32DiskImager utility: Win32DiskImager
- Linux users:
- Run this command to figure out what device name was assigned to the USB drive: $ ls -all /dev/disk/by-id/
- Assuming the USB drive was detected as /dev/sdx write the image on it by typing: $ sudo dd if=filename.img of=/dev/sdx bs=1MB
- Boot Intense PC or MintBox2 from the USB Flash drive.
- When boots up into FreeDOS command line run BIOS_UPD.bat and wait for it's completion without errors.
- After it the system will boot again into FreeDOS run ME_LOCK.bat and wait for it's completion without errors.
- Wait until message "Please disconnect this system from power for 15 sec for completion"
- Power cycle the computer.