Difference between revisions of "TEL-CANBUS"
From fit-PC wiki
(→TEL-CANBUS) (change visibility) |
(→TEL-CANBUS) (change visibility) |
||
Line 25: | Line 25: | ||
=== Configuration === | === Configuration === | ||
* Two Code implementations in one device switchable by a DIP Switch. | * Two Code implementations in one device switchable by a DIP Switch. | ||
− | * Default [https://github.com/linklayer/cantact-fw CANable ] USB CDC implementation & [https://github.com/candle-usb/candleLight_fw candleLight] USB device | + | * Default [https://github.com/linklayer/cantact-fw CANable ] USB CDC implementation & [https://github.com/candle-usb/candleLight_fw candleLight] USB device implementation. |
* DIP switch for enabling/disabling on-board 120 Ohm termination | * DIP switch for enabling/disabling on-board 120 Ohm termination | ||
* Upgradeable using build-in MCU bootloader and openly available tools. (Please follow update guide in [https://github.com/Compulab-Tensor-PC/TEL-CANBUS/blob/master/README.md#firmware-update GitHub]) | * Upgradeable using build-in MCU bootloader and openly available tools. (Please follow update guide in [https://github.com/Compulab-Tensor-PC/TEL-CANBUS/blob/master/README.md#firmware-update GitHub]) |
Revision as of 12:10, 25 August 2021
TEL-CANBUS
- Type: COM
- Config name: FQ
- Compulab part number: FT.Q_CAN
- Interface: COM
- TRIP: 2,3,4,5,6,7,7B,8,9
- Stacking: A, C
- Features: TEL-CANBUS provides a CANbus interface with isolation through a DB-9 connector
Specifications
- Single CAN device using DB9 connector
- Supports CAN 2.0A Specifications and ISO 11898-2
- Bit rate of up to 1Mbit/s
- Isolation per UL 1577
- Transient immunity: 30kV/uS, isolated DC 5V power
- CANbus is driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F042C6) running open source firmware that can be upgraded
- Driverless operation in Windows
- USB native device in Linux
- Over 10 ports can be installed
- Isolated DC 5V power
- Ambient Operation from –40°C to 85°C.
Configuration
- Two Code implementations in one device switchable by a DIP Switch.
- Default CANable USB CDC implementation & candleLight USB device implementation.
- DIP switch for enabling/disabling on-board 120 Ohm termination
- Upgradeable using build-in MCU bootloader and openly available tools. (Please follow update guide in GitHub)
Block diagram
Production files
Schematics
Assembly
Layout
Mechanical
Back to Tensor-PC TEL Modules