Difference between revisions of "TEL-GPIO"
From fit-PC wiki
(Created page with "==TEL-GPIO== =<span style="color: red">'''WORK IN PROGRESS!!!'''</span>= * Type: '''COM''' * Config name: '''FS''' * Interface: '''USB2.0''' * TRIP" '''2,3,4,5,6,7,7B,8,9''' *...") (change visibility) |
(→Specifications) (change visibility) |
||
Line 13: | Line 13: | ||
===Specifications=== | ===Specifications=== | ||
− | + | *Unidirectional Isolation block, isolation per UL 1577 | |
− | + | *GPIOs are driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F072CB) running open source firmware that can be upgraded | |
− | + | *Each GPIO can be configured as input/output in software | |
+ | *Terminal block connector | ||
+ | *3.3V / 5V level can be selected by a DIP switch | ||
+ | *Over 100 GPIO ports can be installed | ||
===Instructions=== | ===Instructions=== |
Revision as of 06:37, 25 August 2021
TEL-GPIO
WORK IN PROGRESS!!!
- Type: COM
- Config name: FS
- Interface: USB2.0
- TRIP" 2,3,4,5,6,7,7B,8,9
- Stacking: A, C
- Features: 20x GPIO - terminal block of 4x GPIO + 4 headers of 4 GPIO each
Specifications
- Unidirectional Isolation block, isolation per UL 1577
- GPIOs are driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F072CB) running open source firmware that can be upgraded
- Each GPIO can be configured as input/output in software
- Terminal block connector
- 3.3V / 5V level can be selected by a DIP switch
- Over 100 GPIO ports can be installed
Instructions
Production files
- Schematics
- Assembly
- Layout
- Mechanical
- 3D 3600 model
Back to Tensor-PC TEL Modules