Difference between revisions of "TEL-GPIO"
From fit-PC wiki
(→Specifications) (change visibility) |
|||
| Line 19: | Line 19: | ||
*3.3V / 5V level can be selected by a DIP switch | *3.3V / 5V level can be selected by a DIP switch | ||
*Over 100 GPIO ports can be installed | *Over 100 GPIO ports can be installed | ||
| − | |||
| − | |||
<!-- | <!-- | ||
| + | ===Instructions=== | ||
| + | |||
* [https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Installation-instructions/TensorPC-TEL-GPIO-installation-instructions.pdf TensorPC TEL-GPIO installation instructions] | * [https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Installation-instructions/TensorPC-TEL-GPIO-installation-instructions.pdf TensorPC TEL-GPIO installation instructions] | ||
| − | + | ||
===Production files=== | ===Production files=== | ||
*Schematics | *Schematics | ||
| − | + | ||
**[https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Schematics/TEL-GPIO-1_0-Schematic.zip TEL-GPIO Rev1.0 Schematic files] | **[https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Schematics/TEL-GPIO-1_0-Schematic.zip TEL-GPIO Rev1.0 Schematic files] | ||
| − | + | ||
*Assembly | *Assembly | ||
| − | + | ||
**[https://fit-iot.com/files//mechanical/TELS/TEL-GPIO/Assembly/TEL-GPIO-1_0-Assembly.zip TEL-GPIO Rev1.0 Assembly files] | **[https://fit-iot.com/files//mechanical/TELS/TEL-GPIO/Assembly/TEL-GPIO-1_0-Assembly.zip TEL-GPIO Rev1.0 Assembly files] | ||
| − | + | ||
*Layout | *Layout | ||
| − | + | ||
**[https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Layout/TEL-GPIO-1_0-Layout.zip TEL-GPIO Rev1.0 Layout files] | **[https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Layout/TEL-GPIO-1_0-Layout.zip TEL-GPIO Rev1.0 Layout files] | ||
| − | + | ||
*Mechanical | *Mechanical | ||
| − | + | ||
**[https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Mechanical/TEL-GPIO.DXF TEL-GPIO Mechanical - DXF]<br> | **[https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Mechanical/TEL-GPIO.DXF TEL-GPIO Mechanical - DXF]<br> | ||
**[https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Mechanical/TEL-GPIO.PDF TEL-GPIO Mechanical - PDF] | **[https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Mechanical/TEL-GPIO.PDF TEL-GPIO Mechanical - PDF] | ||
| − | + | ||
*3D 360<sup>0</sup> model | *3D 360<sup>0</sup> model | ||
| − | + | ||
**[https://sketchfab.com/3d-models/TEL-GPIO-populated-e224f85861e3441eb42a39dd24f8fb3f TEL-GPIO 3D 360<sup>0</sup> model on Sketchfab] | **[https://sketchfab.com/3d-models/TEL-GPIO-populated-e224f85861e3441eb42a39dd24f8fb3f TEL-GPIO 3D 360<sup>0</sup> model on Sketchfab] | ||
--> | --> | ||
Back to [[Tensor-PC TEL Modules]] | Back to [[Tensor-PC TEL Modules]] | ||
Revision as of 07:38, 25 August 2021
TEL-GPIO
WORK IN PROGRESS!!!
- Type: COM
- Config name: FS
- Interface: USB2.0
- TRIP" 2,3,4,5,6,7,7B,8,9
- Stacking: A, C
- Features: 20x GPIO - terminal block of 4x GPIO + 4 headers of 4 GPIO each
Specifications
- Unidirectional Isolation block, isolation per UL 1577
- GPIOs are driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F072CB) running open source firmware that can be upgraded
- Each GPIO can be configured as input/output in software
- Terminal block connector
- 3.3V / 5V level can be selected by a DIP switch
- Over 100 GPIO ports can be installed
Back to Tensor-PC TEL Modules
