TEL-GPIO

WORK IN PROGRESS!!!

• Type: COM
• Config name: FS
• Interface: USB2.0
• TRIP" 2,3,4,5,6,7,7B,8,9
• Stacking: A, C
• Features: 20x GPIO - terminal block of 4x GPIO + 4 headers of 4 GPIO each

Specifications

• Unidirectional Isolation block, isolation per UL 1577
• GPIOs are driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F072CB) running open source firmware that can be upgraded
• Each GPIO can be configured as input/output in software
• Terminal block connector
• 3.3V / 5V level can be selected by a DIP switch
• Over 100 GPIO ports can be installed

Back to Tensor-PC TEL Modules