TEL-GPIO
From fit-PC wiki
TEL-GPIO
- Type: COM
- Config name: FS
- Interface: USB2.0
- TRIP" 2,3,4,5,6,7,7B,8,9
- Stacking: A, C
- Features: 20x GPIO - terminal block of 4x GPIO + 4 headers of 4 GPIO each
Specifications
TEL-GPIO provides Isolated per UL 1577 GPIO input-output via USB CDC implementation
- GPIOs are driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F072CB) running open source firmware that can be upgraded
- 4 I/O GPIO on the device
- Extendable up to 20 Isolated I/O GPIO.
- Switch selectable GPIO power level(3.3v / 5.0v).
- 2500 V rms for 1 minute per UL 1577
- Unidirectional Isolation block.
- Programmable GPIO input or output.
- Reprogrammable MCU FW using build-in bootloader and openly available tools.
- TEL-GPIO is Utilizing a USB2 Interface
- Multiple TEL-GPIO cards can be installed in a system. Over 100 GPIO ports can be installed
- Ambient Operation from –40°C to 85°C.
Production files
Schematics
Assembly
Layout
Mechanical
Back to Tensor-PC TEL Modules