https://fit-pc.com/wiki/index.php?title=TEL-GPIO_technical_documentation&feed=atom&action=history
TEL-GPIO technical documentation - Revision history
2024-03-28T18:56:03Z
Revision history for this page on the wiki
MediaWiki 1.25.2
https://fit-pc.com/wiki/index.php?title=TEL-GPIO_technical_documentation&diff=7983&oldid=prev
Andrew: Created page with "== Compulab part number == '''FT.S_GPIO''' == Description == TEL-GPIO provides Isolated GPIO input-output via USB CDC implementation * 4 I/O GPIO on the device * Extendabl..."
2020-05-31T13:53:44Z
<p>Created page with "== Compulab part number == '''FT.S_GPIO''' == Description == TEL-GPIO provides Isolated GPIO input-output via USB CDC implementation * 4 I/O GPIO on the device * Extendabl..."</p>
<p><b>New page</b></p><div>== Compulab part number ==<br />
'''FT.S_GPIO'''<br />
<br />
== Description == <br />
TEL-GPIO provides Isolated GPIO input-output via USB CDC implementation<br />
<br />
* 4 I/O GPIO on the device <br />
* Extendable up to 20 Isolated I/O GPIO.<br />
* Switch selectable GPIO power level(3.3v / 5.0v).<br />
* Unidirectional Isolation block. <br />
* Programmable GPIO input or output. <br />
* Reprogrammable MCU FW using build-in bootloader and openly available tools.<br />
* TEL-GPIO is Utilizing a USB2 Interface <br />
* Multiple TEL-GPIO cards can be installed in a system.<br />
<br />
<br />
== Features ==<br />
* GPIO through Terminal block connector<br />
* Implemented using on Core: Arm® 32-bit Cortex®-M0 CPU - STM32F072CB<br />
<br />
=== Software ===<br />
* Windows and Linux support <br />
** Driverless operation in Windows and Linux <br />
<br />
=== Electrical and environmental ===<br />
* Isolation per [https://standardscatalog.ul.com/standards/en/standard_1577_5 UL 1577]<br />
* 2500 V rms for 1 minute per UL 1577<br />
* Ambient Operation from –40°C to 85°C.<br />
<br />
=== Configuration ===<br />
<br />
* Upgradeable using build-in MCU bootloader and openly available tools. (Please follow update guide in [https://github.com/Compulab-Tensor-PC/FT_S.GPIO])<br />
<br />
=== Open source hardware and software ===<br />
* Complete hardware design files are available<br />
* Complete firmware is available<br />
<br />
<br />
== Connection requirements ==<br />
=== Host interface ===<br />
USB2<br />
=== Physical connection ===<br />
* [[TRIP]]<br />
or<br />
* [[USBTT]]<br />
<br />
== Version information ==<br />
Latest HW Version Rev 1.0<br />
<br />
==Block diagram==<br />
<br />
<br />
ToDo: Add block diagram<br />
<br />
== Mechanical model ==<br />
ToDo: Add 3D model<br />
<br />
== Hardware design files ==<br />
ToDo: Add Gerbers <br />
ToDo: Add Schematics<br />
<br />
== Software source files ==<br />
<br />
ToDo add files<br />
* [https://github.com/Compulab-Tensor-PC/FT_S.GPIO Firmware source files on GitHub]</div>
Andrew