Tensor-PC TEL Modules

From fit-PC wiki
Jump to: navigation, search
  • This page provides technical information about Tensor-PC TEL Modules.
  • TEL Moduless extend Tensor-PC functionality and I/O.
  • TEL Modules stands for TEnsor ELlement. An extension card for Tensor-PC. Multiple TELs can be installed at the same time.
  • TEL Modules standard is open to allow 3rd parties to design their own application specific TEL Modules
  • The full production files of each Compulab TEL Modules are published below to allow 3rd parties to modify for their needs

Tensor-PC TEL Modules Types

  • TEL-SERX4 (4x RS232 / RS485 with DB9 connectors)
  • TEL-SERX1 (1x RS232 by DB9)
  • TEL-CANBUS (???)
  • TEL-GPIO (20x GPIO - terminal block of 4x GPIO + 4 headers of 4 GPIO each)
  • TEL-GPIOEXT (4x GPIO by a terminal block (to be used with TEL-GPIO))
  • TEL-AUDIO (Headphones / line-out + microphone using 2x 3.5mm)
  • TEL-USB3X4V (4x USB3.1 type A)
  • TEL-USB2X4V (4x USB2.0 type A)
  • TEL-USB3PCIV4 ("4x USB 3.1 type A vertical connectors)
  • TEL-LANX2 (2x Gbit Ethernet ports using RJ45)
  • TEL-LANX4 (4x Gbit Ethernet ports using RJ45)
  • TEL-M2B (an M.2 key-B socket with SIM card tray + 2x Pentaband antennas (each with a panel and MHF cable))
  • TEL-M2E (an M.2 key-E socket + 2x Wi-Fi antennas (each with a panel and MHF cable))
  • TEL-MINIPCIE (a mini PCIe socket with SIM card tray + 2x Pentaband antennas (each with a panel and U.FL cable))
  • TEL-POEX2 (2x Gbit Ethernet with PoE PSE 802.3at Type 1 by RJ45)
  • TEL-DPHDMI (Display Port + HDMI, designed for TRIP-M)
  • TEL-DPmHDMI (mini Display Port + HDMI)
  • TEL-STD (Display Port + Gbit Ethernet)
  • TEL-PO (A power module for 12VDC PSU with twist lock, Incl. 60W PSU and AC cord.)
  • TEL-POW (A power module for 12V - 56V DC, ATX connector with locking, Incl. 120W PSU and AC cord.)
  • TEL-NVME (M.2 2280 NVMe card or M.2 SATA)
  • TEL-SATA1 (2x 2.5" SSD / HDD)