Search found 55 matches
- Mon Jul 19, 2010 1:19 pm
- Forum: Wish list
- Topic: Mini B - mini A USB cable instead of the USB A adapter
- Replies: 0
- Views: 4246
Mini B - mini A USB cable instead of the USB A adapter
About standard FitPC2i accessories: I noticed I frequently need the "mini USB A to USB A female" adapter provided to plug a mini USB B device with its "mini USB B to USB A male"... A mini USB B - mini USB A cable (both males) would be more convenient here. I suggest to replace one of those two adapt...
- Mon Jul 19, 2010 9:29 am
- Forum: Display interface
- Topic: Fit-VGA out of range signal
- Replies: 4
- Views: 8269
Re: Fit-VGA out of range signal
Thank you for such a quick answer !
- Mon Jul 19, 2010 9:18 am
- Forum: Wish list
- Topic: Small Battery
- Replies: 2
- Views: 6610
Re: Small Battery
I suggest you add a 15 minutes battery to prevent power cuts. That would be a nice move to use this empty 2.5" sata slot. I think it shouldn't cost a lot for the internal connector, next to the unused sata slot. I guess the chipset already has batteries monitoring ability. And the company would mak...
- Mon Jul 19, 2010 8:59 am
- Forum: Other Linux distributions
- Topic: Mandriva lists two eth0 and no eth1
- Replies: 0
- Views: 3769
Mandriva lists two eth0 and no eth1
The Mandriva One 2010 graphical network configuration tool lists the eth0 twice and there isn't eth1. The second eth0 is really the eth0 itself, not a miss labeled eth1 : I've tested a configuration, it points to eth0. The ifconfig output seems ok. I guess I will do a manual config the old way with ...
- Mon Jul 19, 2010 8:49 am
- Forum: Display interface
- Topic: Fit-VGA out of range signal
- Replies: 4
- Views: 8269
Fit-VGA out of range signal
When I use FitPC2i with Fit-VGA and a LCD 19" 1280x1024, the vga signal is out of range for the monitor (77Hz vertical).
As I can't see anything, I can't change the OS settings for the display.
What should I try ?
(I borrowed a hdmi monitor for the moment, but I can't keep it...)
As I can't see anything, I can't change the OS settings for the display.
What should I try ?
(I borrowed a hdmi monitor for the moment, but I can't keep it...)
- Mon Jul 19, 2010 7:57 am
- Forum: fit-PC2 BIOS
- Topic: Boot from MiniSD cardreader?
- Replies: 14
- Views: 20119
Re: Boot from MiniSD cardreader?
I've installed Linux on a microSDHC 8Gb with an USB adapter (the Mandriva One installer doesn't see miniSD card as an available disk, but with USB it's ok). The bootloader is GRUB and it boots when the microSDHC is in the USB adapter. When I use the same microSDHC in a miniSD adapter it does not boo...
- Fri Jul 16, 2010 10:02 pm
- Forum: Other Linux distributions
- Topic: mini howto mandrive with pulsbo and HT
- Replies: 9
- Views: 16542
Re: mini howto mandrive with pulsbo and HT
Mandriva One 2010 : success
Mandriva One 2010.1 (spring): fail at the graphic startup (bug mentionned above)
(btw no luck also with Ubuntu 9.10)
Mandriva One 2010.1 (spring): fail at the graphic startup (bug mentionned above)
(btw no luck also with Ubuntu 9.10)
- Fri Jul 16, 2010 8:57 am
- Forum: Other Linux distributions
- Topic: mini howto mandrive with pulsbo and HT
- Replies: 9
- Views: 16542
Re: mini howto mandrive with pulsbo and HT
No luck with Mandriva 2010 Spring ( 2010.1 ) with an Internet http install (I booted stage1 on usb or pxe). The Poulsbo chipset is detected, graphic card chosen accordingly. When I configure X during the install I have a blank screen and then the installer resume with an error message... I will try ...
- Fri Jul 16, 2010 8:51 am
- Forum: fit-PC2 BIOS
- Topic: Boot from MiniSD cardreader?
- Replies: 14
- Views: 20119
Re: Boot from MiniSD cardreader?
By the way : I seems it supports boot on SDHC
Does this mean there is no longer the 2Gb limit ?
Can I buy any 4Gb or 8Gb SDHC to boot ?
Does this mean there is no longer the 2Gb limit ?
Can I buy any 4Gb or 8Gb SDHC to boot ?
- Fri Jul 16, 2010 8:33 am
- Forum: fit-PC2 BIOS
- Topic: Boot from MiniSD cardreader?
- Replies: 14
- Views: 20119
Re: Boot from MiniSD cardreader?
Yes , thanks, I've read some other post here :
Sorry for asking too quickly...yzh wrote:The Fit-PC2i v1.2 (newest revision) supports booting from SDHC according to the wiki:
http://www.fit-pc2.com/wiki/index.php?t ... _Revisions