No Audio After BIOS Update

tccc143
Posts: 34
Joined: Mon Oct 26, 2009 1:57 pm

Re: No Audio After BIOS Update

Post by tccc143 »

Step by step of install.....

remove old drivers and program. Use new install from your web site. Install drivers, and then reboot. When computer restarts it says it is searching for drivers and then installs a drivre version from 2005. How do I keep the computer from installing this other driver on reboot? I think this may be some of the problem. I have tried to delete and install from safe mode, but it does not work. I also have an OHM tester and so far it shows no power coming from the audio jack.

tccc143
Posts: 34
Joined: Mon Oct 26, 2009 1:57 pm

Re: No Audio After BIOS Update

Post by tccc143 »

I finally have the new driver installed correctly with the patch, and it shows it is working correctly but I still have no sound from the jack. I believe the jack may be defective. How do I go about returning the item under warranty to get it repaired?

irads

Re: No Audio After BIOS Update

Post by irads »

Leonid wrote:Hi.

It looks that BIOS update causes this bug. This version of BIOS is not recomended for fit-PC2 rev. 1.21.

Please, perform the following actions:
1. Install BIOS from 24-Dec-2009.
2. After reboot, enter to BIOS.
3. Go to Exit tab.
4. Change Reset Configuration Data to "Yes".
5. Choose Exit Saving Changes option.

tccc143
Posts: 34
Joined: Mon Oct 26, 2009 1:57 pm

Re: No Audio After BIOS Update

Post by tccc143 »

It worked......your the man!!!!!!!!!!! Thanks

Post Reply

Return to “Windows on fit-PC2”