Page 1 of 1

win7 and audio line out

Posted: Fri Oct 13, 2017 10:56 am
by mikri
What is the trick to get line audio out from fit-pc2i? I have tried all possible drivers, also native Realtek ALC662 drivers. I have tried also other HW and no help.
Windows show that audio is going to speakers, but nothing come out.

Re: win7 and audio line out

Posted: Sat Oct 14, 2017 10:02 pm
by irads

Re: win7 and audio line out

Posted: Mon Oct 16, 2017 6:10 am
by mikri
irads wrote:Have you tried here?
http://www.fit-pc2.com/download/win7-drivers/
Yes, I have. That driver does not recognize when I plug in line out cable and speaker is then disabled. There is updated driver at realtek support page and that enable speaker, but nothing come out.

Re: win7 and audio line out

Posted: Sat Oct 21, 2017 5:24 pm
by irads

Re: win7 and audio line out

Posted: Thu Oct 26, 2017 2:41 pm
by mikri
i have tried this. does not work.

Re: win7 and audio line out

Posted: Sun Oct 29, 2017 2:46 pm
by irads
This could be a hardware problem or misconfiguration.
You can double check that the speakers are functional and that they are plugged into the correct jack.
You may try audio with Linux (can boot from a thumb drive without installation).
If the fit-PC2i is under warranty you may consider an RMA.

Sorry for the inconvenience.

Re: win7 and audio line out

Posted: Thu Nov 02, 2017 7:04 am
by mikri
Hi,
this was HW issue. Two first HW had not working line out. Now I have third HW and this one has audio.
Great, now I can get into real project with this one to build SDR radio.
Mika