Page 2 of 3
Re: failure when using as a 24/7 server
Posted: Mon Jul 12, 2010 9:42 pm
by LG1
its a external own powered 3,5 drive not a 2,5 inch usb powered one.
the driver is named embedded gma500..
so i deinstalled the embedded driver.
Re: failure when using as a 24/7 server
Posted: Wed Jul 14, 2010 12:56 pm
by LG1
ok well at first the diinstalled embedded driver seems to work butt then agian it crashed..
well for remote acces and all remote ethernet stuff.
local i can still login butt when i do i can only move the mouse the rest of the screen is frozen.
i now am deinstalling software starting with firewall then virus protection and stuf and see what helps.
Re: failure when using as a 24/7 server
Posted: Thu Jul 15, 2010 9:19 am
by LG1
well a update again.
its still premature but today the first night the system did not crash.
when tomorrow its stil working i am going to install software back onto it to see what software is causing this problem.
and then i hoop its not fitpc2 related
and i have a nice 24/7 server that i can rely on.
Re: failure when using as a 24/7 server
Posted: Fri Jul 16, 2010 11:15 am
by LG1
its starting to be a monologe topic haha
well its did not crash off of last post zo lets see what happens when i reinstall software.
thumps up
Re: failure when using as a 24/7 server
Posted: Sun Jul 18, 2010 9:49 am
by LG1
anti virus back up and running last night
no crash yet.
mmm
only one thing to try with software and then i am back connecting the external usb drive.....
maybe i connected this drive today and see if it happens then.
Re: failure when using as a 24/7 server
Posted: Sun Jul 18, 2010 3:18 pm
by LG1
back to this to myself posting topic
virus software not yet crashing my remote control so i dont think it was the virus software.
i am now going to connect my external usb harddrive again
its not usb powered but a 3,5inch external hd case with ofcourse ( its a 3,5 inch drive and not a 2,.5 inch ) own power supply.
lets see what happens.
Re: failure when using as a 24/7 server
Posted: Sun Jul 18, 2010 5:09 pm
by LG1
ok this is strange
the drive is connected for a while and now i get a message that files written to drive E ( the external drive ) are lost because of a hardware failure
i can also no longer acces the drive.
edit
when i want to disconned the drive using the save hardware removable icon on the right bar of the screen then nothing happens and the drive letter stay's acttive.
edit 2
i powered down the fitpc2 and then powered it up again
my usbn is no longer showing.
reconnecting the usb is not working
i needed to disconnect the power of the usb drive to get it working again.
i dont have these problems when this drive is connected to other pc and i have this usb case for years now already running 24/7 without problems.
bios setting already set to only... should i disable it al togheter?
Re: failure when using as a 24/7 server
Posted: Sun Jul 18, 2010 8:23 pm
by irads
When fit-PC2 is turned off USB is still powered. Maybe the disk USB controller some-how entered an unknown state where only power cycling of the disk resets it back to normal.
Re: failure when using as a 24/7 server
Posted: Mon Jul 19, 2010 8:09 am
by LG1
irads wrote:When fit-PC2 is turned off USB is still powered. Maybe the disk USB controller some-how entered an unknown state where only power cycling of the disk resets it back to normal.
well i got the error yesterday and lost the drive inside windows
now after 1 night its stil running.
can it maybe have something to do with large file transfers?
Re: failure when using as a 24/7 server
Posted: Mon Jul 19, 2010 9:12 am
by irads
There is no known issue with file transfers when C-states are disabled (GV3 only in BIOS) as in your case.