fit-IoT Users Forum

Posted: **Thu Jun 11, 2015 11:15 am**

AHCI Link Power Management is a mechanism where the SATA controller puts the SATA link to the internal HDD/SSD storage into a low power mode, thus saving power and reducing temperature.

http://www.fit-pc.com/wiki/index.php/AH ... Management

It can be very helpful tweak for fitlet users, but not only.

Posted: **Mon Jun 15, 2015 1:33 pm**

Just to be sure, to reduce mSATA temp, on Win7 "ALPM – HIPM/DIPM" option should be set to "Lowest"?

The "Active" option is pretty confusing...

Posted: **Wed Jun 17, 2015 1:48 pm**

Yes, it should be the Lowest.

fit-IoT Users Forum

How to decrease HDD/SSD power consumption and generated heat

How to decrease HDD/SSD power consumption and generated heat

Re: How to decrease HDD/SSD power consumption and generated

Re: How to decrease HDD/SSD power consumption and generated