Page 2 of 2

Re: IPC2 serial ports...

Posted: Sat Feb 11, 2017 8:59 am
by rrossi
The middle one (n°2) is the one which don't works.
We managed to make 1 and 3 working with the mentioned tricks (UEFI boot + forcing IRQ setting after auto-detection for one of the ports).

We are sending a lot of data on these serial ports, so we need the IRQ to works well. With simple tests with a terminal, all ports seems to works because they are falling back to polling. But polling performance is not enough for our application.

Re: IPC2 serial ports...

Posted: Wed Mar 01, 2017 3:14 pm
by mbirger
As I have mentioned in earlier post it is an Embedded Controller serial port which is a "black box" to us and operate ad-hoc. Not all devices supported on it. It is closed Intel architecture.