View unanswered posts | View active topics It is currently Fri Aug 23, 2019 2:34 pm



Reply to topic  [ 4 posts ] 
 iPC2 Randomly Switching Off 
Author Message

Joined: Sun Jul 26, 2015 5:41 am
Posts: 2
Location: Cottenham, Cambridge, UK
Post iPC2 Randomly Switching Off
I have been using an Intense PC2 i7 as a firewall (Sophos UTM) for the last four months, but am having a problem with it spontaneously switching off roughly every 3-5 weeks. When this happens the only front panel light is a red 1/0 LED, and it is necessary to manually press the reset button to restart it. The firewall's logs just stop when this happens - there is no indication of any problems prior to the iPC2 switching off or of the shutdown being software initiated, so this looks like a hardware problem.

The iPC2 is running from a UPS and none of the other devices connected to it are affected, so it is not a mains supply issue. Also, the BIOS is configured to switch itself on after power is resumed (State After G3 = State S0), and switching the external power off and on again does cause it to boot normally.

The BIOS is also configured to support Wake on LAN. If a software shutdown is performed, leaving the iPC2 with just the red 1/0 LED lit then sending the WoL "magic packet" causes the iPC2 to boot as expected. However, after it has spontaneously switched off the "magic packet" is ignored; the iPC2 remains switched off.

What is the problem likely to be? How can I fix it? Are there any workarounds?

Alex


Sun Jul 26, 2015 9:22 am
Profile WWW
Site Admin

Joined: Mon Mar 16, 2009 2:11 pm
Posts: 2339
Post Re: iPC2 Randomly Switching Off
From your description it appears IPC2 crashes, rather than shutting down. Due to the rare and intermittent occurrence it may be difficult to pinpoint the root cause.
Memtest - exhaustive in this case - is highly recommended. If memory errors are found - replace RAM, if the behavior manifests more frequently, we can proceed investigation from there.

We can also replace the unit without identifying root cause, but then if the problem is not with the hardware itself it might persist.

Sent from my GT-N7100 using Tapatalk

_________________
-------------------------
Irad Stavi
fit-PC forum admin

-------------------------


Mon Jul 27, 2015 10:10 pm
Profile

Joined: Sun Jul 26, 2015 5:41 am
Posts: 2
Location: Cottenham, Cambridge, UK
Post Re: iPC2 Randomly Switching Off
I left MemTest86+ v4.20 running all RAM tests for 11 hours without a single error:
Image

I had to run MemTest86+ in fail safe mode otherwise it hung on start-up before running any tests. Is there any other test that you would recommend to help diagnose the crashing?

Alex


Tue Jul 28, 2015 4:02 pm
Profile WWW
Post Re: iPC2 Randomly Switching Off
Three options availible:
1. You can try BIOS update/override - many times some variables are being cleared by BIOS install:
http://www.fit-pc.com/wiki/index.php/IPC2_BIOS_Update
2. You can run stability test on Linux Mint 17 or Windows 7
3. We can replace your IPC2 but cannot guarantee that it will solve the problem, as we believe it is a SW issue.


Mon Aug 03, 2015 10:51 am
Display posts from previous:  Sort by  
Reply to topic   [ 4 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.