IPC2 I5 4300 Haswell Bios Update

Post Reply
greenoaktree
Posts: 3
Joined: Fri Jan 24, 2020 6:29 am

IPC2 I5 4300 Haswell Bios Update

Post by greenoaktree »

The IPC2 Bios update instruction is :
http://fit-pc.com/wiki/index.php?title= ... iew_mobile

But there many points it did not show us:
This is my way to update IPC2 Haswell bios:

My IPC2 old bios version:IPC2_3.330.4R X64
1.First ,download new bois version :IPC2_3.330.5 X64 from
http://fit-pc.com/wiki/index.php?title= ... _ROM_files
There are two version,choosing by your face module.
Download the zip file ,unzip to get a img file.Use Rufus write the img to a flash disk.
Plug the flash disk to IPC2,reboot from flash disk,you should see Dos command line interface ,run BIOS_UPD.bat and ME_LOCK.bat as the instruction.
If there is no error,you update successfully to IPC2_3.330.4R X64.
But I found ,there is some problom ,I can not enter Bios by pressing F2.
This is wired!!!
I can't solve this problem,so I choose to update the Bios the latest version :IPC2_3.330.7 X64.

2.Download the IPC2_3.330.7 X64 zip file from http://fit-iot.com/files/download/inten ... .330.7.zip
Unzip and copy all the files to a flash disk with FAT32 format.
Because I can't enter bios,so Just plug it and reboot.
If you are lucky,you can enter the interface so called internal Shell.
As the instruction,run update.nsh and me_up.nsh.
If there is no error,you have updated to latest bios,and pressing F2 can enter the bios.

tamir
Site Admin
Posts: 419
Joined: Mon Dec 25, 2017 4:21 pm

Re: IPC2 I5 4300 Haswell Bios Update

Post by tamir »

If you can't access the BIOS menu on the IPC2 at startup pressing F2, you could remove the storage device and it will automatically log into it.

Post Reply

Return to “IPC2 BIOS”