Page 1 of 1
Vesa Plate/Filtlet-T?
Posted: Mon Apr 24, 2017 8:37 pm
by prejto
Just a quick question. Will the Fitlet-T fit on the Vesa Plate?
Thanks,
Peter
Re: Vesa Plate/Filtlet-T?
Posted: Sun Apr 30, 2017 12:49 pm
by mbirger
Re: Vesa Plate/Filtlet-T?
Posted: Sat Jun 16, 2018 9:50 am
by prejto
I purchased one of these mounting plates about a year ago, however, I do not have access to it as it is holding a FitPC running a remote telescope in Australia.
I need to manufacture a new equipment bay before having access to the Vesa plate. Is it possible to get a technical drawing showing the mounting holes and measurements? If not, is it possible to just get a scan of the plate along with one dimension, please.
Thanks!
Peter
Re: Vesa Plate/Filtlet-T?
Posted: Sun Jun 24, 2018 11:12 am
by tamir
Sorry for the late reply.
The VESA mount for the fitlet-T should be the same as for the IPC1/2/3 models.
Hence you can find the 3D drawing and installation guides at the below links, from the IPC product link at wiki:
http://fit-pc.com/wiki/index.php/IPC2
*Scroll down to "Accessories".