Un-used connector?

[Arwen]

When I had my fitlet-iA10 apart, I noticed a few un-used connectors.

One has been explained as being the remote power switch. It's the 2
pin right near the front panel power switch. So, that's taken care of.

The other is above HDMI 2, and consists of 6 pins. With the plastic
back panel in place, this connector can't be used at all. It looks like
it was intended to have a cut-out in the back panel. Note that this is
NOT the GPIO connector, which already has a description and back
panel cut-out.

fitlet team, care to share?

(Or did I let something out of the bag? Sorry...)

[irads]

I confirm the remote power connector.
The 6 pin connector has additional GPIO signals but is not supported in fitlet and is likely to be removed in future revisions.