Page 1 of 1
reduce the electrical consumption
Posted: Tue Jun 21, 2016 9:35 am
by ploubaz22
I am looking to reduce the electrical consumption of fitlet pc IA10
the fitlet runs on windows 7 x86
in the setup I have reduced the TDP but this does not change much
I also try to invalidate the sound as well as the serial port card
the best I get is a conommation of 7w
there may be another parameter that I can act
thank you
Re: reduce the electrical consumption
Posted: Wed Jun 22, 2016 11:37 am
by mbirger
You can disable any HW that is not a must, either via BIOS or via OS settings.
Re: reduce the electrical consumption
Posted: Sun Jun 26, 2016 2:38 pm
by ploubaz22
mbirger wrote:You can disable any HW that is not a must, either via BIOS or via OS settings.
thank you for your help, but i don't known wath is HW
Re: reduce the electrical consumption
Posted: Wed Jun 29, 2016 12:20 pm
by mbirger
hardware
Re: reduce the electrical consumption
Posted: Mon Nov 28, 2016 8:32 pm
by ploubaz22
ihave disable serial port and sound card
For processor in the setup i have reduce to 2 hearts and the power reduce to 4200
I made a measure at amperemeter and I find 800 mA
Do you have other ideas to reduce consumption
Re: reduce the electrical consumption
Posted: Sun Dec 04, 2016 5:59 pm
by ploubaz22
I made measurements of current consumption on the pc fitlet
If I put a bar of 4 G I fitlet consumes 140 mA less than with a bar of 8G
What is strange when I stop the pc I have a current of 180 to 200 mA
The fitlet pc in operation I arrive at a consumption of 380 mA with 4 G Ram and SSD 500 G
but 180mA when the fitlet was stop that makes a lot
Re: reduce the electrical consumption
Posted: Thu Dec 08, 2016 10:07 am
by mbirger
This is correct.
It is also stated on fitlet spec - operation from 4.5W, which corresponds to 380mA at 12V.