Application note - good thermal management of fitlet

Post Reply
irads

Application note - good thermal management of fitlet

Post by irads »

http://www.fit-pc.com/wiki/index.php/Ap ... _of_fitlet

Some properties of passively cooled mini PC are silence, reliability, freedom from maintenance and … heat.
fitlet is a very robust mini PC that can provide surprisingly high performance in a small footprint. A fitlet user does not need to care for under-the-hood heat management. This application note is written for technically inclined users that wish to get the most out of the computer and to better understand heat management issues.
Since the introduction of fitlet Compulab tuned fitlet heat dissipation and heat management. As a result fitlet now runs cooler. This makes for better user experience and easier deployment in extreme conditions.

TheLaG
Posts: 5
Joined: Wed Sep 09, 2015 12:04 pm

Re: Application note - good thermal management of fitlet

Post by TheLaG »

I kinda wonder, does such mSATA heat sink is needed for fitlet-H or it's good enough because of larger space inside? :roll:

irads

Re: Application note - good thermal management of fitlet

Post by irads »

fitlet-H shares form-factor with fit-PC4. There is a large install base of units with mSATA installed. Excess heat of mSATA has never been an issue.
There is also an option to install 2.5" SSD in fitlet-H.

Post Reply

Return to “Power and heat”