Page 1 of 1

fitlet DC plug

Posted: Fri Feb 06, 2015 5:43 am
by bibo01
12) What are the exact measurements of 12V DC plug?

Re: Hardware questions

Posted: Fri Feb 06, 2015 5:31 pm
by irads
12) It is highly recommended to get the twist lock DC cord from CompuLab.

See "DC Cable" on http://www.fit-pc.com/web/purchasing/order-accessory/

Re: Hardware questions

Posted: Sat Feb 07, 2015 2:56 am
by bibo01
irads wrote:12) It is highly recommended to get the twist lock DC cord from CompuLab.

See "DC Cable" on http://www.fit-pc.com/web/purchasing/order-accessory/
If I may not be able to get hold of one, although I suppose it is part of the power supply the fitlet come with (please confirm), can I please have the exact measurements because I intend to make a LPSU for the unit.
irads wrote:EMC testing is underway. fitlet meets CE mark class B and is comparable to fit-PC2 in low radiated emission.
Given that Milspec RF emission requirement is much much tighter than the FCC consumer PC standards, how far would Fitlet be from it?

Re: Hardware questions

Posted: Sun Feb 08, 2015 2:03 am
by bibo01
irads wrote:I don't know.
Sorry to insist...

Do you mean that you also don't know the exact measurements of the DC plug?

Re: Hardware questions

Posted: Mon Feb 09, 2015 8:03 am
by irads
The DC plug is 5.5/2.5 mm, 8.5mm long.