Page 1 of 1
incomplete documentation
Posted: Tue Feb 16, 2016 11:21 pm
by trigger
I bought a filet XA10 lan barebone.
in the packaging a separately packaged small metal plate with black pad was there
for what should be the good
Re: incomplete documentation
Posted: Wed Feb 17, 2016 10:59 pm
by Arwen
That's the mSATA heat sink.
If you are using a SD/SDHC/SDXC instead, you don't need it.
Plus some mSATA SSDs don't get that hot.
But, you are right they should have some instructions on both what is
included. And how to use it.
Re: incomplete documentation
Posted: Wed Feb 17, 2016 11:49 pm
by hassellbear
The mSATA Heatplate installation instructions are found in the wiki at this location.
http://www.fit-pc.com/wiki/index.php/Fi ... e_Assembly