View unanswered posts | View active topics It is currently Fri Dec 13, 2019 3:14 pm



Reply to topic  [ 4 posts ] 
 Equip Fitlet With A Mini-Monitor & Camera Accessory Mount 
Author Message

Joined: Mon May 28, 2012 12:25 pm
Posts: 106
Post Equip Fitlet With A Mini-Monitor & Camera Accessory Mount
Overview

This project began as an effort to mount a Mini-HDMI monitor onto fitlet for use in portable applications. The 5" mini-monitor I have is designed for photographic applications, so it is configured for the industry standard 1/4 inch - 20 threads per inch mount.

As work progressed on designing a mount which uses the 14 inch - 20 TPI system, it became apparent that there was no reason to limit the mount to simply attaching a monitor to fitlet. In actuality such a mount allows attaching any type of 1/4" - 20 TPI photographic/video device to fitlet. Such items include:

- Mini-monitors
- Action cameras
- Still Cameras
- Lights
- Light meters
- Camera flash units (using hotshoe adapter)
- many more

Attachment:
Accessories.jpg
Accessories.jpg [ 125.24 KiB | Viewed 3731 times ]


Some items listed above may not really complement or interface with fitlet, but you can mount them if you wish.



Required Materials

The materials required for the mount are:

- Aluminum flat bar (1" x 1/4" x 2')
- One 1/4" 20 TPI bolt - 3/4" long
- Two M3 flat head machine screws - 16 mm long
- Ball swivel camera mount adapter
- Metalic spray paint (Krylon Metalic closely matches fitlet's color)
- Rubber equipment feet (peel and stick, greater than 1/4" thick)

Attachment:
Materials.jpg
Materials.jpg [ 51.63 KiB | Viewed 3731 times ]





Form Factor

The form factor I arrived at was a very simple "U" or "Horseshoe" shape. This shape greatly simplified fabrication and proved to be relatively easy to make. The dimensions of the mounting bracket were chosen so as to provide ample clearance both above and behind fitlet. The goal was to not adversely affect fitlet's heat dissipation and to allow plenty of room for cables connecting to the back of fitlet.

Attachment:
Form Factor.JPG
Form Factor.JPG [ 1.54 MiB | Viewed 3731 times ]


Mon Jan 25, 2016 6:40 am
Profile

Joined: Mon May 28, 2012 12:25 pm
Posts: 106
Post Equip Fitlet With A Mini-Monitor & Camera Accessory Mount
Fabrication

Fabrication was straight forward and fairly easy. In general the steps were:

- Cut aluminum bar to the required length
- Bend aluminum bar into the required "U" shape
- Radius ends of bar using a belt sander
- Drill required holes (2 - 1/8" and 1 - 5/16")

Attachment:
Fabricate.jpg
Fabricate.jpg [ 244.49 KiB | Viewed 3729 times ]




Finish and Paint

The finishing steps consisted of:

- produce matte finish on bar using wire wheel (enhance paint adhesion)
- spray paint using metallic color
- Oven bake paint to speed drying and make finish durable

Attachment:
Finish-Paint.jpg
Finish-Paint.jpg [ 244.94 KiB | Viewed 3729 times ]




Attach Bracket to Fitlet

The bracket was designed to attach using fitlet's bottom VESA mount points.

- Affix 4 peel and stick rubber feet to the bottom of Fitlet as shown in the photo.
-Attach the bracket to fitlet using 2 - M3 x 16mm flat head machine screws

Attachment:
Attach to Fitlet.jpg
Attach to Fitlet.jpg [ 244.9 KiB | Viewed 3729 times ]


Mon Jan 25, 2016 6:55 am
Profile

Joined: Mon May 28, 2012 12:25 pm
Posts: 106
Post Equip Fitlet With A Mini-Monitor & Camera Accessory Mount
Install Camera Mounting Hardware

Install the 1/4" - 20 TPI machine bolt and camera ball swivel mount

Attachment:
Add Attachments.jpg
Add Attachments.jpg [ 243.31 KiB | Viewed 3727 times ]




Attach Accessories to Fitlet Using the Mount


WiFi Linked Action Camera
Attachment:
Action Cam.jpg
Action Cam.jpg [ 427.9 KiB | Viewed 3727 times ]



Mini HDMI Monitor
Attachment:
Mini Monitor.jpg
Mini Monitor.jpg [ 64.24 KiB | Viewed 3727 times ]


Mon Jan 25, 2016 7:05 am
Profile

Joined: Mon May 28, 2012 12:25 pm
Posts: 106
Post Equip Fitlet With A Mini-Monitor & Camera Accessory Mount
The Mount in Action

Here is the Mini HDMI Monitor securely attached to Fitlet using the new mount.

Attachment:
At Work.JPG
At Work.JPG [ 1.81 MiB | Viewed 3727 times ]




Measured Drawing

Here is a measured drawing for those who wish to make their own camera/video accessory mount.

Attachment:
coming-soon.png
coming-soon.png [ 47.95 KiB | Viewed 3727 times ]




Conclusions

1. The filtet camera/video accessory mount is simple to fabricate and very useful.

2. Fitlet demonstrates its considerable versatility - yet again


Mon Jan 25, 2016 7:14 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 4 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.