Page 1 of 1

BIOS 0.46.01.00: Setting Power State after G3 to S5

Posted: Wed Apr 10, 2019 6:12 pm
by lab.bench1
With newer Fitlet2 boards, the PMIC issue of only being in sleep when shutdown was fixed (FITLET2ERR003), however I don't see the power state setting in the latest BIOS menus.

The system still seems to only be able to enter the sleep state (Power LED is Yellow) when shutdown.

Re: BIOS 0.46.01.00: Setting Power State after G3 to S5

Posted: Mon Apr 15, 2019 11:44 am
by tamir
The Amber LED has nothing to do with the fitlet2's power states, please refer back to FITLET2ERR003 where the below note mentioned:

"Note: Amber LED on power button stays on at S5. This is unrelated to FITLET2ERR003"

Re: BIOS 0.46.01.00: Setting Power State after G3 to S5

Posted: Mon Apr 15, 2019 6:50 pm
by lab.bench1
Understood. However there is no option in the BIOS to keep the board off and wait for a button press when power is first applied. Do you have any recommendations?

Re: BIOS 0.46.01.00: Setting Power State after G3 to S5

Posted: Tue Apr 16, 2019 9:59 am
by tamir
I assume you are referring to the fitlet2's auto-on feature.
Unfortunately shutting it off is not possible, the fitlet2 is designed to be turned on upon AC-in at any case.
This feature is a requirement by the majority of our customers and unfortunately cannot be altered.

Re: BIOS 0.46.01.00: Setting Power State after G3 to S5

Posted: Tue Apr 16, 2019 2:27 pm
by lab.bench1
Got it, thanks for the clarification!