pre-built debian image, Legacy mode
Posted: Tue Apr 23, 2019 2:06 pm
I have been using a pre-built Debian image on plenty on different hardware without issues, but it doesn't work on the fitlet2.
There's no UEFI so I tried the BIOS setting to boot exclusively in legacy mode. And just to be sure also selected Linux as operating system, even though it doesn't seem to be important.
I tried plenty of combinations without success
To be sure the image is not the problem. I tried to install Debian the regular way, which works perfectly in UEFI mode.
When the BIOS is in Legacy mode, the installation works perfectly, but the system doesn't boot and is not even visible in the boot section of the BIOS
Is there any BIOS settings I missed
The BIOS version out of the box is FLT2.0.46.01.00
There's no UEFI so I tried the BIOS setting to boot exclusively in legacy mode. And just to be sure also selected Linux as operating system, even though it doesn't seem to be important.
I tried plenty of combinations without success
To be sure the image is not the problem. I tried to install Debian the regular way, which works perfectly in UEFI mode.
When the BIOS is in Legacy mode, the installation works perfectly, but the system doesn't boot and is not even visible in the boot section of the BIOS
Is there any BIOS settings I missed
The BIOS version out of the box is FLT2.0.46.01.00