GPIO (leds) default values
Posted: Tue Oct 15, 2019 2:38 pm
I have not found any setting in the UEFI to set the default value of LED 2 and 3 to off.
How can it be done?
Thank you
How can it be done?
Thank you
Support forum for users of Compulab fit-IoT computers
https://www.fit-iot.com/forum/
thank you Tamir, we are already using the gpio to control the LEDs.tamir wrote:Please find below manual for controlling the fitlet2 GPIO front LEDs:
http://fit-pc.com/wiki/index.php?title= ... front_LEDs
Thank you Tamirtamir wrote:Unfortunately, it is not possible to control the default behavior from EFI.
This requires certain BIOS development as this feature is currently not available.
Can you please check the BIOS version of this device?Mikael63 wrote: ↑Wed Mar 24, 2021 5:35 pmAfter my RMA, these LED behave a little differently.
Previously, I could with a simple script (Linux) turn off the LED directly at startup, if I wanted.
These LED then remained off even at shutdown.
Now these LED are lit green which feels illogical. Yellow or off when the unit is off would have been more logical.
BIOS version FLT2.MBM2.0.46.02.00Andrey.Mazlin wrote: ↑Mon Mar 29, 2021 8:36 amCan you please check the BIOS version of this device?
Confirmed - works!Andrey.Mazlin wrote: ↑Thu Apr 01, 2021 12:24 pmSee this: https://fit-pc.com/wiki/index.php?title ... 7-Mar-2021
R&D did a roll back of BIOS, so you can try to install a new version.
https://fit-pc.com/wiki/index.php?title ... IOS_Update