lvds format

DVI, HDMI (or lack of), VGA (or lack of), supported displays
Post Reply
maor
Posts: 2
Joined: Tue Aug 03, 2010 10:16 am

lvds format

Post by maor »

hello,

where i find the lvds protocol (timer, pin out...)
Thank

fly
Posts: 162
Joined: Thu Jul 22, 2010 2:02 pm

Re: lvds format

Post by fly »

LVDS is somewhat standardized in ANSI/TIA/EIA-644 (1995) and quite some documents and papers are out there on the internet, e.g. [1] or [2]. Little information on the LVDS on fitPC2(i) is available in the sbc reference guide [3].

[1] http://www.national.com/analog/interfac ... ers_manual
[2] http://www.interfacebus.com/Design_Connector_RS644.html
[3] http://www.compulab.co.il/fitpc2/downlo ... sb-man.pdf

maor
Posts: 2
Joined: Tue Aug 03, 2010 10:16 am

Re: lvds format

Post by maor »

Sorry that i asking again. Is the LVDS format is unique and known? Or there are a few variations of his? If he is not unique where can I find the information of the LVDS format in FITPC2i?


Thanks

irads

Re: lvds format

Post by irads »

fit-PC2i is not generally available with LVDS interface.
Please consult SBC-FITPC2I reference guide for more info.

Post Reply

Return to “Display interface”