View unanswered posts | View active topics It is currently Sun Jan 26, 2020 2:50 am

Reply to topic  [ 1 post ] 
 fit-PC2 > fit-VGA > Xenarc 700TSV-B 
Author Message

Joined: Sat Apr 16, 2011 6:51 pm
Posts: 1
Post fit-PC2 > fit-VGA > Xenarc 700TSV-B
I spent way too many hours on this so I thought I'd share my findings. As mentioned in the title I have a fit-PC2 (Z550) connected to a Xenarc touch screen display through a fit-VGA adapter. Initially I tried the drives from the fit-PC2 download area but none had 800x480@60 WVGA support that worked with the 700TSV.

Using IEGD I tried to build a custom driver with that resolution as the default for this non-EDID display. Initially I used the suggested DTD settings from the Xenarc site but the display always failed and the monitor would shut off. Oddly I could use PowerStrip to force the resolution I wanted using the Xenarc suggested DTD and the display was perfect. And using PowerStrip to apply the custom resolution seemed to be my only option. But I persevered and was finally able to build a custom driver which would boot perfectly every time. It will even supports EDID displays if you boot with one attached, just in case you need it.

I hope this helps someone in the future.

File comment: IEGD 10.4 configuration files to build the driver [3.51 KiB]
Downloaded 379 times
Sat Apr 16, 2011 7:20 pm
Display posts from previous:  Sort by  
Reply to topic   [ 1 post ] 

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.