Spectre/Meltdown, SSD specs

Post Reply
eak
Posts: 4
Joined: Sun Aug 04, 2019 10:32 pm

Spectre/Meltdown, SSD specs

Post by eak »

Airtop3 looks like a fine product.
I have a few questions:
(1) Does the Xeon E-2244G option [CE2244] have hardware fixes for Spectre/Meltdown, or is this still being done with firmware hacks?
(2) What are the specs on the 1TB SSD options (HS1X1T vs. NVME1X1T)? E.g. read/write speeds?
(3) As I understand it, it comes with two Gigabit ethernet. Does installing WiFi replace one of these, or does one end up with three network interfaces?


kgardas
Posts: 3
Joined: Wed Oct 23, 2019 9:06 am

Re: Spectre/Meltdown, SSD specs

Post by kgardas »

Hi,
I'm also curious if provided Xeon E-2288G solves some Spectre/Meltdown vulnerabilities in silicon or not. Unfortunately googling around just does not help. Intel information about it are kind of foggy.
Also I don't think this was answered on the forum so if I may ask, could someone from Compulab be so nice and verify with Intel what's the current state of fixed vulnerabilities in Airtop3 CPUs? Personally I'm most interested in Xeon due to ECC RAM support.
Thanks!
Karel

irads

Re: Spectre/Meltdown, SSD specs

Post by irads »

Xeon E-2288G is CFL-R.
See https://www.anandtech.com/show/13659/an ... itigations for details regarding Spectre and Meltdown mitigation provisions.

Post Reply

Return to “General Airtop3 questions”