FitPC2i Crashes after installing win7 ethernet driver

Post Reply
Harish P
Posts: 1
Joined: Fri Oct 18, 2013 1:18 am

FitPC2i Crashes after installing win7 ethernet driver

Post by Harish P »

FitPC2i Crashes after installing win7 ethernet driver downloaded from http://www.fit-pc2.com/download/win7-dr ... 130917.zip

1) Recently purchased fit-PC2i 2GB/1.6GHz Diskless (SN 1130724-01353)
2) Installed Intel Solidstate Drive 520 series 120GB capacity
3) Windows 7 OEM installed on the SSD using WAIK (Windows Automatic Installation Kit)
4) WiFi started working right away.
5) Ethernet did not get installed suring windows installation
6) win7 ethernet driver downloaded from http://www.fit-pc2.com/download/win7-dr ... 130917.zip
7) Installed the driver for ethernet - before finishing the driver installation system went to a sleep like mode with no response for key hits
8) Power recycling got the system booted from windows with blue screen - message on blue screen is related to graphics driver, not related to ethernet
9) Power recycling and started with repair mode
10) Another FitPC2i crashed but power recycling came up with bootup screen frozen

Any known issues or possible solutions?

Thanks
..HP

mbirger

Re: FitPC2i Crashes after installing win7 ethernet driver

Post by mbirger »

It seems like a SW failure.
fit-PC2 and fit-PC2i have minor difference, so most drivers fit both but fit-PC2i specific drivers should be downloaded from fit-PC2i page.
Please re-install them:
http://www.fit-pc2.com/download/fit-pc2i/win7-fit-pc2i/

If doesn't help, I would recommend making a clear OS installation according to the steps described:
http://www.fit-pc.com/wiki/index.php/Ho ... _USB_stick

After, please use the links to download all the relevant drivers from the relevant locations:
http://www.fit-pc2.com/download/win7-drivers/
http://www.fit-pc2.com/download/fit-pc2i/win7-fit-pc2i/

Post Reply

Return to “Windows 7”