Page 1 of 1
Remove auto-on ?
Posted: Sat Aug 22, 2009 10:57 am
by gman
I was wondering if it is possible to remove instant on a unit with instant-on and if it possible is it hard do do that ?
This is because i don't know if i want it or not. it would be nice if its possible to disable and enable it even if you need to open the fit2-pc to do that (switch/strap) ?
Re: Remove auto-on ?
Posted: Sat Aug 22, 2009 12:07 pm
by irads
Instant-on is hardwired and cannot be removed.
Re: Remove auto-on ?
Posted: Wed Nov 11, 2009 6:36 pm
by sdevans2
With the instant on do you have the option to use the regular power cord and the option to wire to the 12 volt battery?
Re: Remove auto-on ?
Posted: Wed Nov 11, 2009 9:12 pm
by irads
Yes. Instant-on has no effect on the 12V power rail.
Re: Remove auto-on ?
Posted: Thu Aug 05, 2010 4:23 pm
by davophoto1
Is there something I can solder to remove the auto-on hard wiring?
Re: Remove auto-on ?
Posted: Thu Aug 05, 2010 10:03 pm
by yogev_ezra
You can add a power switch into 12V cable, and control the power using that switch. Other option is Fit-PC2 version 1.21 which has non auto-on version.