View unanswered posts | View active topics It is currently Thu Feb 20, 2020 1:23 pm



Reply to topic  [ 30 posts ]  Go to page 1, 2, 3  Next
 HDD x2? 
Author Message

Joined: Wed Dec 23, 2009 10:06 am
Posts: 4
Post HDD x2?
Hey there,

im planing to order two or three fit-PC2´s but im still wondering:
Will there every be hardware with 2 HDD slots? I really want to use RAID on those HDDs. So any ETA for 2x HDD slots? (No I dont want to connect a 2nd 2,5" HDD via USB)

Greetings HH


Wed Dec 23, 2009 10:23 am
Profile
Site Admin

Joined: Mon Mar 16, 2009 2:11 pm
Posts: 2352
Post Re: HDD x2?
There is no possibility to add a 2nd HDD interface to fit-PC2.

_________________
-------------------------
Irad Stavi
fit-PC forum admin

-------------------------


Wed Dec 23, 2009 1:52 pm
Profile

Joined: Wed Dec 23, 2009 10:06 am
Posts: 4
Post Re: HDD x2?
That wasnt my question. The question was if there will ever be hardware like Fit-PC3 with HDD-slots or isnt there anything planed yet? You should know that running a server like this with 1 hdd is too risky.
So are there any plans for new hardware? maybe also with audio out via HDMI?


Wed Dec 30, 2009 12:40 pm
Profile
Site Admin

Joined: Mon Mar 16, 2009 2:11 pm
Posts: 2352
Post Re: HDD x2?
We do not discuss future products.

_________________
-------------------------
Irad Stavi
fit-PC forum admin

-------------------------


Wed Dec 30, 2009 12:41 pm
Profile

Joined: Sun Mar 22, 2009 2:49 pm
Posts: 539
Location: Israel
Post Re: HDD x2?
I have found something interesting:

Jan 24, 2010 – Taiwan Commate Computer Inc. (COMMELL), announced its new 2-port External Serial ATA (eSATA) Host Bus Adapter PCI Express mini card -- MPX-3132. MPX-3132 board maximizes the performance of two external SATA ports, built on the high-speed Sil3132 SteelVine controller, connects two 3 Gbps external Serial ATA (eSATA) device ports to a single lane Mini-PCI Express host connection and includes support for FIS based port multiplier switching which accesses multiple drives simultaneously, effectively aggregating the bandwidth of the drives (Traditional SATA controllers only support CMD based switching which can only access a single drive at a time).

The board has a bandwidth of 3Gbps per port, making them ideal for connecting multi-drive storage solutions, and it is compatible with Windows, Linux operating systems, with software RAID driver enables RAID 0 (FAST), 1 (SAFE) and BIG (drive spanning) when single drives are connected to the (two) eSATA ports. When connected to a port multiplier, RAID 0 (FAST), 1 (SAFE), 10 (SAFE & FAST) and BIG (drive spanning) are supported, as well as RAID 5 using a Silicon Image software RAID driver.

Attachment:
MPX-3132_400x237.jpg
MPX-3132_400x237.jpg [ 93.65 KiB | Viewed 7888 times ]

I plan to order a sample to check whether Fit-PC2 can work with it. I will post here how goes.
*** DISCLAIMER: Replacing the mini-PCIe card in Fit-PC2 voids your warranty ***


Tue Mar 09, 2010 7:33 pm
Profile WWW

Joined: Sat Jan 02, 2010 9:39 pm
Posts: 29
Post Re: HDD x2?
Very interesting, please do let us know. It is about 50 euros near where I live, so reasonable. I do wonder, are those connectors the actual e-sata connectors or would we need some other cable in between?


Sat Mar 13, 2010 9:14 am
Profile

Joined: Sun Mar 22, 2009 2:49 pm
Posts: 539
Location: Israel
Post Re: HDD x2?
Those are wafer connections, and the manufacturer supplies 2x wafer to SATA data cables (as shown on the picture):
Attachment:
OALSATA7-H10_400x348.jpg
OALSATA7-H10_400x348.jpg [ 60.72 KiB | Viewed 7811 times ]

I assume SATA power you will still have to take from Fit-PC2 own SATA power connector (or external power supply).

If it does work, it should exhibit faster disk transfer speed, since current implementation is based on IDE controller which is slower than PCIe bus. I have attached the datasheet of this card as well.


Attachments:
MPX-3132.rar [154.58 KiB]
Downloaded 327 times
Sat Mar 13, 2010 12:11 pm
Profile WWW

Joined: Sat Jan 02, 2010 9:39 pm
Posts: 29
Post Re: HDD x2?
Thanks for the information, I figured there'd be something like that. Looks very nice indeed. I suppose you just need a decent power supply with 5 and 12 volt, like this one:

Quote:
DC Output: +5V / 2.0A
+12V / 2.0A

The new green harddrives usually don't draw more than 1A on each line, so you can power two off of this one (using a molex to 2x sata power cable)

The poor fit-pc2 would look very small compared to the two 3.5" harddrives ;)


Mon Mar 15, 2010 9:56 am
Profile

Joined: Sun Mar 22, 2009 2:49 pm
Posts: 539
Location: Israel
Post Re: HDD x2?
I have ordered a few samples, and they should arrive in about 3 weeks. I will post here after I test them.


Mon Mar 15, 2010 11:20 am
Profile WWW

Joined: Sat Jan 02, 2010 9:39 pm
Posts: 29
Post Re: HDD x2?
Obviously it would be cool if we can create one or two connectors that plug into the wafer connector on the mini pci card and that you can mount internally onto the fit-pc2 chassis. I really wonder if it will all fit, though ;)
I suppose just cutting the cable supplied with the MPX-3132, and connecting it to an esata socket would work: http://www.addonics.com/support/faqs/im ... _large.gif

I'll wait for your results, thanks!


Mon Mar 15, 2010 11:41 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 30 posts ]  Go to page 1, 2, 3  Next

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.