View unanswered posts | View active topics It is currently Sat Jan 18, 2020 8:59 pm

Reply to topic  [ 2 posts ] 
 Changing DDR2 ram 
Author Message

Joined: Mon Sep 24, 2012 6:54 pm
Posts: 229
Post Changing DDR2 ram
I keep puzzling over how you solder ram to the computer board in the fit-pc2, and what you do if the piece of ram fails tests afterwards; and I keep coming up with the answer that 200 pins are a lot of pins, and I have never seen a piece of ram sold as a computer part with 90-degree angle pins. I will probably have to buy a fit-pc2 and deliberately void its guarantee by taking the case apart to verify that there is no conventional piece of DDR2 ram plugged into a 90-degree, close-fitting socket.

Best regards to the sexton, and he is welcome to delete this post.

Tue Jul 02, 2013 9:44 pm
Site Admin

Joined: Mon Mar 16, 2009 2:11 pm
Posts: 2348
Post Re: Changing DDR2 ram
The DDR2 is soldered directly on-board chip by chip (8 chips overall) in a similar manner to the RAM soldering in many mobile devices.
Each chip is similar to the one you would find on an SODIMM RAM.

See ... itpc2i.jpg
4 chips on the left side are the DDR2 (another 4 are on the other side).
It may save you opening the fit-PC2...

In fit-PC3 and Intense PC we opted for standard SODIMM modules which are user-accessible.

Irad Stavi
fit-PC forum admin


Mon Jul 08, 2013 2:03 pm
Display posts from previous:  Sort by  
Reply to topic   [ 2 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.