Page 1 of 1
Fit-PC2 Dead, no lights
Posted: Thu May 03, 2012 1:05 pm
by riverratt
My Fit PC2 is dead no lights the external power supply is good. Is there any sivicable power supply inside.
Robert
Re: Fit-PC2 Dead, no lights
Posted: Thu May 03, 2012 1:43 pm
by gabrielh
If you press the power button, is there still no lights on?
Re: Fit-PC2 Dead, no lights
Posted: Thu May 03, 2012 1:46 pm
by riverratt
Nothing happens when I press the power button. No light on the front or back.
Re: Fit-PC2 Dead, no lights
Posted: Thu May 03, 2012 1:47 pm
by gabrielh
I suggest you to RMA the unit
Re: Fit-PC2 Dead, no lights
Posted: Thu May 03, 2012 4:56 pm
by riverratt
Took some time to do some more checks and found the problem. My power cord end is bad. I hope the connector in the Fit-PC2 did not over heat and melt any solder connections.
Is the 12V connector standard?
I am feeding the Fit-PC form a 12V source? To hook it up I cut the power cord off the power supply and spliced it to the 12V power source.
Re: Fit-PC2 Dead, no lights
Posted: Fri May 04, 2012 5:12 am
by gabrielh
FitPC2 needs 12v to operate