Connection to Epson Stylus 4900 printer

Post freely any questions you have about fit-PC2
Post Reply
Dror
Posts: 2
Joined: Thu Apr 05, 2012 6:25 am

Connection to Epson Stylus 4900 printer

Post by Dror »

During our development of a program we found a problem.
We lose the connection to the Epson printer that is connected to our PC.
We connect to the printer using USB.
The problem can be solved sometimes when disconnecting and then reconnecting the printer again.

Do you know about such a problem?
Can you advice about the best USB connection?
Maybe setting?

Thanks,

Dror.

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: Connection to Epson Stylus 4900 printer

Post by gabrielh »

1. Please use on of the rear USB ports
2. Try to not attach any other USB device to the neighbor (upper or lower) USB port.
3. Try to attach your printer through powered USB hub
Gabriel Heifets

Fit-PC2/3/IntensePC support.

Post Reply

Return to “General fit-PC2 questions”