Press F1 key message on boot _ PC2

Post freely any questions you have about fit-PC2
Post Reply
snydl0ga
Posts: 1
Joined: Thu Apr 05, 2012 7:35 pm

Press F1 key message on boot _ PC2

Post by snydl0ga »

I just bought the PC2 and placed a drive in it. Then I imaged it with an image from another PC2.

When I boot it halts during BIOS load and says I need to hit the F1 key because the drive may be about to crash....or something to that effect.

It runs fine once you get past the F1 message. I looked in the BIOS settings and the drive detect is on Auto.

I do not use a keybaord on this system....any one have any ideas?

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: Press F1 key message on boot _ PC2

Post by gabrielh »

Can you please try it out with a different HDD?
Gabriel Heifets

Fit-PC2/3/IntensePC support.

Post Reply

Return to “General fit-PC2 questions”