I can only use Fit-PC2 with one monitor

Post freely any questions you have about fit-PC2
Post Reply
hmooers
Posts: 2
Joined: Mon Dec 13, 2010 4:46 pm

I can only use Fit-PC2 with one monitor

Post by hmooers »

Hello, I have a Fit-PC2 running windows 7 SP1. I have used the computer with several monitors but now it will only work with one monitor, an Acer v223w. With this monitor all is fine. If I shut down the computer and connect a different monitor with with VGA or DVI nothing comes up. I have tried older VGA only monitors and newVGA/DVI monitors and no other displays work.

On the monitors that do not work the screen background is black and I CAN see the mouse cursor arrow. However, there is no response from the mouse with either left or right click.

If you have seen this behavior or have a suggestion I would be very happy.

Thanks
HM

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: I can only use Fit-PC2 with one monitor

Post by gabrielh »

Please try to boot in to the safe mode and check if you are able to use those monitors. If this is a driver issue, there is an alternative video driver to try
Gabriel Heifets

Fit-PC2/3/IntensePC support.

Post Reply

Return to “General fit-PC2 questions”