fit-PC2i How to replace cmos battery?

Post Reply
Martin75a
Posts: 2
Joined: Thu Aug 30, 2012 12:12 pm

fit-PC2i How to replace cmos battery?

Post by Martin75a »

Hi,

My name is Martin and I bought a fit-PC2i for some years ago from you and I must say I am very pleased with It.
The problem I have now is that the cmos battery looks to be out of power and every time the power fails the bios set back to default again.

Is it possible or how to change the Bios Battery?

Best Regards
Martin

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: fit-PC2i How to replace cmos battery?

Post by gabrielh »

Hello Martin

The battery is soldered to the base board. You can unsolder it and replace, but do it only on your own risk, because it will void your warranty. A possible solution to your problem is to save your BIOS setup as default. In a case of a power lose, the FitPC2 will load the desired settings. RTC will be updated with internet time
Gabriel Heifets

Fit-PC2/3/IntensePC support.

Martin75a
Posts: 2
Joined: Thu Aug 30, 2012 12:12 pm

Re: fit-PC2i How to replace cmos battery?

Post by Martin75a »

Hi, Gabrielh

Ok, Thanks for the info.

mvh
Martin

Post Reply

Return to “fit-PC2 BIOS”