Hello
I just got my new fit-pc3 last week. I'm not able to run the box with two screens. I assume right, that one monitor goes to the hdmi and the other to the dual-port. The one on the dualport always stays black.
In windows it also "No-PnP Monitor". It's the same as on the HDMI (Dell 1905FP). If I start the AMD Vision Control Engine I get 2 screens. One is called Dell 1905FP, the other is called "fake".
Any idea what I have to do to get both screens working?
Thanks
Dual Head on Windows 7
Re: Dual Head on Windows 7
The problem is most likely with the DisplayPort cabling. If you have another cable available I suggest you try with it.
To convince you it is not a problem with dual head - disconnect the HDMI and try to work with DisplayPort only. I expect you will still see no image with existing cabling.
To convince you it is not a problem with dual head - disconnect the HDMI and try to work with DisplayPort only. I expect you will still see no image with existing cabling.
Re: Dual Head on Windows 7
hi
As you said, displayport is still not working. In that case I will order the HP 481409-001 - as you mentioned, that this one is compatible. I'm really curious if they are not identical.
Will update you if this solved the problem.
As you said, displayport is still not working. In that case I will order the HP 481409-001 - as you mentioned, that this one is compatible. I'm really curious if they are not identical.
Will update you if this solved the problem.