fit-PC Users Forum

Fit-PC3 power use in sleep mode
Page 1 of 1

Author:  Poita [ Fri Mar 08, 2013 1:40 am ]
Post subject:  Fit-PC3 power use in sleep mode


I have a fit-PC3 Pro with a SSD and Win7 running as a carPC. The computer is put into sleep mode or resumes from sleep on with the accessories signal from the ignition.

What I would like to know is what sort of power this fit-PC3 uses when in sleep mode as I got up this morning and my battery was at 6.5V!! :( So trying to isolate what may have been causing the drain.

I have the following connected:

The fit-PC3. Goes into sleep mode with the ignition OFF.

DCDC-USB intelligent power supply. Uses less than 1mA in standby apparantly. ... de=PWR-034

ARC Audio Amplifier - this is tuned on/off with the ignition as well so shouldn't be drawing any current.

Lilliput 8" screen - 869GL-80NP/C/T-HB ... on-137.htm


Author:  gabrielh [ Sun Mar 10, 2013 7:18 pm ]
Post subject:  Re: Fit-PC3 power use in sleep mode

The power consumptions of the FitPC3 pro in a sleep mode is less then 600mW.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group