VGA (or lack thereof)

DVI, HDMI (or lack of), VGA (or lack of), supported displays
Post Reply
evaguy
Posts: 1
Joined: Fri May 25, 2012 3:26 am

VGA (or lack thereof)

Post by evaguy »

I see in the specifications that the fit-PC3 has HDMI and Displayport, but no mention of VGA. Is it possible to use a Displayport to VGA adapter? If so, is 800x600 a possible resolution? My special application requires that specific resolution. Thanks! :D

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: VGA (or lack thereof)

Post by gabrielh »

You can use FitPC3 with a FitVGA adapter under Windows 7 environment
Gabriel Heifets

Fit-PC2/3/IntensePC support.

Takenaka
Posts: 21
Joined: Tue Apr 28, 2009 7:35 am

Re: VGA (or lack thereof)

Post by Takenaka »

Where can I get the FitVGA adapter for VGA monitor? Thanks.

prpixel
Posts: 44
Joined: Tue Apr 28, 2009 12:14 am

Re: VGA (or lack thereof)

Post by prpixel »

Amazon.com

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: VGA (or lack thereof)

Post by gabrielh »

Please contact sales@compulab.co.il
Gabriel Heifets

Fit-PC2/3/IntensePC support.

Andy
Posts: 20
Joined: Fri Aug 17, 2012 11:24 am

Re: VGA (or lack thereof)

Post by Andy »

Hi there,

fit-PC 3 comes with an HDMI to DVI adaptor, so is it not possible to just extend the supplied adaptor with a DVI to VGA adaptor such as the one shown in the attatched image?

HDMI --> DVI --> VGA
Attachments
DVI to VGA.jpg
DVI to VGA.jpg (20.93 KiB) Viewed 14210 times

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: VGA (or lack thereof)

Post by gabrielh »

From this picture I can't tell if will suite or not. The adapter should convert a digital (HDMI/DVI) to an analog (VGA) signal. If this is only a mechanical adapter, then it will not work.
Gabriel Heifets

Fit-PC2/3/IntensePC support.

ilia
Posts: 15
Joined: Mon Jun 25, 2012 11:33 am

Re: VGA (or lack thereof)

Post by ilia »

Our customer wants to connect the Fit-PC3 video to the KVM switch they have.
Unfortunately, this switch supports only the VGA(analog) video input from the PC - not any kind of digital input the Fit-PC3 provides.

Can you suggest some solution for this?
I.e. some digital to analog conversion dongle which can provide the VGA signal to the switch?

The mentioned Fit-PC3 runs Linux - the stock Linux Mint witch is came with the product. If the stock Linux driver does not supports such a setup, can you advice of the needed tweakings?

Thanks.
Ilia.

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: VGA (or lack thereof)

Post by gabrielh »

You can consider to buy one of those DP adapters. They are suitable with Fit-PC3 .
Gabriel Heifets

Fit-PC2/3/IntensePC support.

Post Reply

Return to “Display interface”