View unanswered posts | View active topics It is currently Tue Oct 22, 2019 6:18 am



Reply to topic  [ 7 posts ] 
 Fit-PC3 will not boot with USB monitor attached 
Author Message

Joined: Wed Mar 26, 2014 12:28 pm
Posts: 4
Post Fit-PC3 will not boot with USB monitor attached
Hello,

I am using an USB monitor (AOC 1659 fwu) to my Fit-PC3 (attached to the USB 3.0 port). It works nicely if I connect it after Windows 7 has started. However if it's attached when I turn it on, it will freeze even before Windows is initiated. I have updated the BIOS to the latest version (SBC_2.1.0.333_14 X64) and also disabled all other booting options than the hard drive, but nothing helps.

Any Idea is welcome!
Thanks

Pelle


Wed Mar 26, 2014 1:55 pm
Profile
Post Re: Fit-PC3 will not boot with USB monitor attached
USB3.0 ports are not operational during boot, but only after OS loaded.


Wed Mar 26, 2014 2:24 pm

Joined: Wed Mar 26, 2014 12:28 pm
Posts: 4
Post Re: Fit-PC3 will not boot with USB monitor attached
Thanks mbirger!
But why does the system freeze then? If they are not operational, they shouldn't affect the
start-up procedure or am I missing something?

Regards

Pelle


Wed Mar 26, 2014 2:35 pm
Profile
Post Re: Fit-PC3 will not boot with USB monitor attached
Try to plug other USB device into these ports during boot and see if the same behavior persist. If not, the answer lies in the attached USB monitor.


Wed Mar 26, 2014 2:38 pm

Joined: Wed Mar 26, 2014 12:28 pm
Posts: 4
Post Re: Fit-PC3 will not boot with USB monitor attached
Thanks,

The problem doesn't appear with other devices. Can it be a power issue (even if the problem doesn't exist after windows is started?

/ Pelle


Wed Mar 26, 2014 5:21 pm
Profile

Joined: Wed Mar 26, 2014 12:28 pm
Posts: 4
Post Re: Fit-PC3 will not boot with USB monitor attached
If I start the Fit-PC3 with the USB 3.0 monitor Cable attached to the USB 2.0 port,
it works flawlessly. The problem seems to be with the USB 3.0 computer port not the monitor.

Regards

Pelle


Wed Mar 26, 2014 9:29 pm
Profile
Post Re: Fit-PC3 will not boot with USB monitor attached
If there are no freeze issues with other devices on USB3.0 ports after OS loaded, the ports operate normally. If the issue persist with the USB monitor only the issue lies somewhere with the interop between this USB monitor and USB3.0 controller device. Anyway, I see that you can operate with USB2 ports.


Tue Apr 08, 2014 9:18 am
Display posts from previous:  Sort by  
Reply to topic   [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.