Hi,
today I wanted to test wake on lan feature, but it does not work.
The BIOS WOL is enabled. Do I need any other BIOS setup?
Regards,
Stefan
Wake On Lan does not work
Re: Wake On Lan does not work
Hi,
the problem was I used the wrong network socket for connecting the network cable. You need to use the outer socket!
Regards,
Stefan
the problem was I used the wrong network socket for connecting the network cable. You need to use the outer socket!
Regards,
Stefan
Re: Wake On Lan does not work
You should also check if the device is allowed to wake up pc. You can find this option in the power management tab.
Gabriel Heifets
Fit-PC2/3/IntensePC support.
Fit-PC2/3/IntensePC support.
-
- Posts: 1
- Joined: Sun Apr 07, 2013 9:38 am
Re: Wake On Lan does not work
I am trying to get Wake on LAN working on a Fit-PC 3 and have had no luck. I believe I'm sending the correct magic packet to port 9 and I've tried connecting up the network cable to each of the sockets on the device (as suggested by you, Armadillo), I've also made sure that the network connection is allowed in Windows to wake the device and set the "boot on LAN" setting in the BIOS. Still no luck though. Can anyone please help!?