View unanswered posts | View active topics It is currently Wed Jan 29, 2020 8:20 pm



Reply to topic  [ 3 posts ] 
 Problems Booting from USB 
Author Message

Joined: Sun Feb 23, 2014 9:26 pm
Posts: 1
Post Problems Booting from USB
Hi all,

I just received my Intense-PC Multilan Pro Linux (IPC-D4x2-C3517V-H500-WB-XLM-FM4LAN) and I'm trying to boot up using a bootable 8G USB that I created to install the Untangle NG firewall (Linux based). I've tried booting from this USB on a different computer and it boots fine, however on the IPC it simply doesn't boot.

My boot order in the BIOS indicates that "Generic USB HDD" should be first in boot order. If I hit F5 to specify boot device and select the USB HDD the system blanks the screen for a moment and then returns to the boot menu. Is there something I'm missing in order to allow booting from a USB stick?

Any help appreciated.

Thanks,

Chris


Sun Feb 23, 2014 9:32 pm
Profile

Joined: Thu Dec 05, 2013 12:42 am
Posts: 49
Post Re: Problems Booting from USB
Hi slackcc,

The MintBox 2 ships with legacy boot mode enabled, which means it will only boot off of USB keys which have a boot loader installed to the MBR. I'm unfamiliar with the latest Untangle builds, so I can't speak to whether they are EFI-boot capable or not.

In the Intense PC configuration utility ("BIOS") you can enable Legacy booting mode as well as UEFI booting. I would enable both, as that gives you the most flexibility. If you find you still cannot boot off of your Untangle USB key, I would check the instructions for how you created the key to see if additional steps to install the boot loader are required.

UEFI media is typically VFAT formatted, or has an EFI system partition (VFAT) as the first partition. MBR formatted media can be any partition type, but has a bootloader (such as syslinux, grub, or lilo) installed to the MBR, which is part of the partition table.

Do you have instructions on how you created the Untangle NG USB boot device, or was it shipped to you? Can you provide an fdisk output from another computer of the USB device? That would help determine if it is using UEFI or MBR boot.


Tue Mar 11, 2014 2:15 am
Profile

Joined: Wed Aug 29, 2012 12:18 am
Posts: 67
Post Re: Problems Booting from USB
If you drop into UEFI shell. You can change to and mount to any of the drive. If they are UEFI drives. you simply can change to the UEFI PARTITION within shell and then directly launch the boot loader. This how I installed Win7 Pro to my Intense PC in UEFI mode.


Tue Apr 08, 2014 4:24 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group.
Designed by STSoftware for PTF.