Typical temperature under heavy CPU load

Post Reply
monnier
Posts: 42
Joined: Sat Jan 09, 2010 4:08 am

Typical temperature under heavy CPU load

Post by monnier »

Could someone tell me what kind of temperatures you guys see with your fit-pc3 (especially the k10temp sensors) when both CPUs are busy (with no significant GPU activity), under GNU/Linux?
E.g. running two `memtester' processes.

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: Typical temperature under heavy CPU load

Post by gabrielh »

Can you please specify the model of the FitPC3?
Gabriel Heifets

Fit-PC2/3/IntensePC support.

monnier
Posts: 42
Joined: Sat Jan 09, 2010 4:08 am

Re: Typical temperature under heavy CPU load

Post by monnier »

gabrielh wrote:Can you please specify the model of the FitPC3?
For the Fit-PC3 Pro, ideally.

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: Typical temperature under heavy CPU load

Post by gabrielh »

k10temp shows under 63C during the gzip compression.
Gabriel Heifets

Fit-PC2/3/IntensePC support.

monnier
Posts: 42
Joined: Sat Jan 09, 2010 4:08 am

Re: Typical temperature under heavy CPU load

Post by monnier »

gabrielh wrote:k10temp shows under 63C during the gzip compression.
Thank you, that's very good to know. Was that with a single process (i.e. only using one of the two cores)?

gabrielh
Site Admin
Posts: 1260
Joined: Thu Jun 02, 2011 1:13 pm

Re: Typical temperature under heavy CPU load

Post by gabrielh »

Only one instance of the gzip was used
Gabriel Heifets

Fit-PC2/3/IntensePC support.

Post Reply

Return to “Linux on fit-PC3”