I just got a couple of Fit3's and have a problem with neither of them automatically booting (CentOS 6.2, 64 bit).
The grub menu appears and waits for a key press before continuing even though it's configured to auto boot after a 5 second timeout.
I have CentOS 6.2 (32 bit) working fine on another Fit2.
Anyone have an idea how to solve this. It's a real problem with a headless unit.
CentOS 6.2 doesn't automatically boot (grub)
Re: CentOS 6.2 doesn't automatically boot (grub)
We haven't tested the CenOS on the FitPC3, maybe other users will kindly share their experience
Gabriel Heifets
Fit-PC2/3/IntensePC support.
Fit-PC2/3/IntensePC support.
Re: CentOS 6.2 doesn't automatically boot (grub)
are you sure this is a hardware issue? I would think if you've got grub prompting for a key, as that point it would be a grub configuration issue.
Re: CentOS 6.2 doesn't automatically boot (grub)
Has anyone gotten any further with this issue? I just got a bunch of fit-PC3s I want to install CentOS on, but this boot thing is a real problem. It works fine on a fit-PC2, and any virtual machine I've ever created.
Re: CentOS 6.2 doesn't automatically boot (grub)
For whatever it's worth, setting the grub timeout to 0 results in the machine automatically booting into the default configuration. This isn't perfect, but it's much, much better than being stuck at the boot screen forever!
Re: CentOS 6.2 doesn't automatically boot (grub)
You know, if a normal timeout like 10 seconds won't work and the
box is stuck, it's almost like Grub does not have a working timer.
If that is the case, it might be possible to re-compile Grub to use
a different timer. Even a simple software timer might be acceptable.
For example, if the serial port is not in use, you can set it to 1200bps,
parity and 2 stop bits. That ends up being exactly 100 characters a
second and suitable for sending out 1,000 characters for a 10 second
timeout.
In my case, it will probably be months before I purchase a fit-PC 3,
(my older fit-PC 1 works just fine). But when I do, it will be with
Linux, most likely Gentoo. So whatever solution you find, (besides
timeout of zero), will be useful.
box is stuck, it's almost like Grub does not have a working timer.
If that is the case, it might be possible to re-compile Grub to use
a different timer. Even a simple software timer might be acceptable.
For example, if the serial port is not in use, you can set it to 1200bps,
parity and 2 stop bits. That ends up being exactly 100 characters a
second and suitable for sending out 1,000 characters for a 10 second
timeout.
In my case, it will probably be months before I purchase a fit-PC 3,
(my older fit-PC 1 works just fine). But when I do, it will be with
Linux, most likely Gentoo. So whatever solution you find, (besides
timeout of zero), will be useful.
Arwen Evenstar
Rivendale, Middle Earth
Rivendale, Middle Earth
Re: CentOS 6.2 doesn't automatically boot (grub)
In our case, and I suspect in a lot of places where there will be a large scale deployment of these units, this just won't fly. My marching orders are to keep the OS distribution as close to stock as possible. If I have to start the OS with a non-standard loader, I'm going to have a really tough time convincing folks that nothing else is affected.If that is the case, it might be possible to re-compile Grub to use
a different timer.
Re: CentOS 6.2 doesn't automatically boot (grub)
I have the same problem with elastix 2.3 on Centos 5.7, thankfully setting timeout to 0 works for me
Re: CentOS 6.2 doesn't automatically boot (grub)
Just received a new fit-PC3 to replace my old fit-PC2, installed CentOS 6.3 X86_64 and hit this same problem. Currently using the workaround of setting the delay to 0 but it's not ideal.