Vesa Plate/Filtlet-T?

Post Reply
prejto
Posts: 5
Joined: Mon Apr 24, 2017 8:30 pm

Vesa Plate/Filtlet-T?

Post by prejto »

Just a quick question. Will the Fitlet-T fit on the Vesa Plate?

Thanks,

Peter

mbirger

Re: Vesa Plate/Filtlet-T?

Post by mbirger »

Yes, we offer VESA mounting bracket for it:
http://www.fit-pc.com/web/products/acce ... t-pc3-ipc/

prejto
Posts: 5
Joined: Mon Apr 24, 2017 8:30 pm

Re: Vesa Plate/Filtlet-T?

Post by prejto »

I purchased one of these mounting plates about a year ago, however, I do not have access to it as it is holding a FitPC running a remote telescope in Australia.

I need to manufacture a new equipment bay before having access to the Vesa plate. Is it possible to get a technical drawing showing the mounting holes and measurements? If not, is it possible to just get a scan of the plate along with one dimension, please.

Thanks!
Peter

tamir
Site Admin
Posts: 419
Joined: Mon Dec 25, 2017 4:21 pm

Re: Vesa Plate/Filtlet-T?

Post by tamir »

Sorry for the late reply.

The VESA mount for the fitlet-T should be the same as for the IPC1/2/3 models.
Hence you can find the 3D drawing and installation guides at the below links, from the IPC product link at wiki:

http://fit-pc.com/wiki/index.php/IPC2

*Scroll down to "Accessories".

Post Reply

Return to “General fitlet questions”