PCB 1.3 change?

Post Reply
alpha_one_x86
Posts: 26
Joined: Tue Jul 20, 2010 7:12 pm

PCB 1.3 change?

Post by alpha_one_x86 »

Hi,

I wish know the PCB change in 1.3 for:
Introducing auto-on mechanism independent of CMOS battery voltage
To soldering same.

Cheers,
My project for do file copy: http://ultracopier.first-world.info/

tamir
Site Admin
Posts: 419
Joined: Mon Dec 25, 2017 4:21 pm

Re: PCB 1.3 change?

Post by tamir »

The fitlet models revision notes are available at the below link:
http://fit-pc.com/wiki/index.php/Fitlet:_Revision_Notes

alpha_one_x86
Posts: 26
Joined: Tue Jul 20, 2010 7:12 pm

Re: PCB 1.3 change?

Post by alpha_one_x86 »

Yes, it's where I have exact this line. But I need know what have change on PCB to soldering it.
My project for do file copy: http://ultracopier.first-world.info/

tamir
Site Admin
Posts: 419
Joined: Mon Dec 25, 2017 4:21 pm

Re: PCB 1.3 change?

Post by tamir »

Unfortunately company policy do not allow to provide such information.

alpha_one_x86
Posts: 26
Joined: Tue Jul 20, 2010 7:12 pm

Re: PCB 1.3 change?

Post by alpha_one_x86 »

Ok, few bit strange because if I buy the last buy I will get the information.
My project for do file copy: http://ultracopier.first-world.info/

Post Reply

Return to “fitlet hardware”